background image

Table of Contents

© 

Copyright 2019 All rights Reserved

Kubota provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Kubota
assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Kubota reserves the right
to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. 

Kubota is a registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

4/11/19

AP-SGM1566, AP-SGM1572, & AP-SGM1578 Grapples 380-051MK

Table of Contents

Important Safety Information   . . . . . . . . . . . . .  1

Safety at All Times   . . . . . . . . . . . . . . . . . . . . . . . . . 1
Look for the Safety Alert Symbol . . . . . . . . . . . . . . . 1
Safety Labels   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . .  7

Application   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using This Manual   . . . . . . . . . . . . . . . . . . . . . . . . . 7

Terminology  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Definitions   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Owner Assistance  . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Serial Number   . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Section 1: Assembly & Set-Up   . . . . . . . . . . . .  8

Skid Steer/Tractor Requirements   . . . . . . . . . . . . . . 8
Torque Requirements  . . . . . . . . . . . . . . . . . . . . . . . 8
Before You Start  . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Optional Upper Grapple Fork   . . . . . . . . . . . . . . . . . 9
Customer Supplied Hydraulics   . . . . . . . . . . . . . . . . 9
Optional Hydraulic Cylinder Shield   . . . . . . . . . . . . 10
Skid Steer & Tractor Hook-Up . . . . . . . . . . . . . . . . 11
Hydraulic Hose Hook-Up . . . . . . . . . . . . . . . . . . . . 12
Check Equipment Clearances  . . . . . . . . . . . . . . . . 13
Purging Hydraulic System  . . . . . . . . . . . . . . . . . . . 13

Section 2: Operating Procedures  . . . . . . . . .  14

Operating Checklist . . . . . . . . . . . . . . . . . . . . . . . . 14
General Inspection   . . . . . . . . . . . . . . . . . . . . . . . . 14
Operating Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Transport Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Grapple Operation   . . . . . . . . . . . . . . . . . . . . . . . . 16

Picking Up A Load  . . . . . . . . . . . . . . . . . . . . . . . 16
Traveling With A Load  . . . . . . . . . . . . . . . . . . . . 16
Releasing A Load . . . . . . . . . . . . . . . . . . . . . . . . 16

Unhook Grapple   . . . . . . . . . . . . . . . . . . . . . . . . . . 17
General Operating Instructions  . . . . . . . . . . . . . . . 17

Section 3: Maintenance & Lubrication  . . . . .  18

Maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Skid Steer/Tractor Maintenance   . . . . . . . . . . . . . . 18
Spear Removal & Assembly  . . . . . . . . . . . . . . . . . 18
Long-Term Storage  . . . . . . . . . . . . . . . . . . . . . . . . 19
Lubrication Points  . . . . . . . . . . . . . . . . . . . . . . . . . 19

Grapple Fork Pivot Points   . . . . . . . . . . . . . . . . . 19
Hydraulic Cylinder Pivot Points   . . . . . . . . . . . . . 19

Section 4: Specifications & Capacities  . . . . . 20
Section 5: Features & Benefits   . . . . . . . . . . . 21
Section 6: Troubleshooting  . . . . . . . . . . . . . . 22
Section 7: Torque Values Chart . . . . . . . . . . . 23
Section 8: Warranty & Legal Disclaimer  . . . . 24

Содержание AP-SGM1566































Отзывы: