Introduction
AP-SC6072 Skid Cutter 327-321MK
4/6/21
10
Definitions
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Skid Cutter have been specially
designed by Kubota/Land Pride and should only be
replaced with genuine Kubota parts. Contact a Kubota
dealer if customer service or repair parts are required.
Your Kubota dealer has trained personnel, repair parts,
and equipment needed to service the attachment.
See
“Specifications & Capacities”
on page 30 and
“Features & Benefits”
on page 32 for additional
information and performance enhancing options.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Kubota dealer. For location of
your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
IMPORTANT:
A special point of information related
to the following topic. Kubota’s intention is this
information must be read & noted before continuing.
NOTE:
A special point of information that the
operator should be aware of before continuing.
74803
Manual storage tube
Introduction
Kubota welcomes you to the growing family of new
product owners. This Skid Cutter has been designed with
care and built by skilled workers using quality materials.
Proper assembly, maintenance, and safe operating
practices will help you get years of satisfactory use from
this product.
Application
This SC6072 construction-grade Skid Cutter is designed
with the commercial or high use customer in mind. It
features a rigid hitch mounting system, 1/4" thick deck, 4
swinging blades, and a bi-fold door on the front. The
SC6072 is capable of cutting and shredding brush or
trees up to 6" in diameter. Carbide mulching teeth
mounted on the bottom of the blade carrier can be used
for grinding stumps.The strong push bars on top and
under the door of the SC6072 Skid Cutter allow the
operator to push trees and brush over and away from the
operator as they are being cut without damaging the unit.
The ability to cut and mulch trees and stumps level to the
ground makes this cutter ideal for clearing right-of-ways
along road sides, pipelines or under electrical
transmission lines with the speed and efficiency needed
by today’s contractors. Farmers, ranchers and land
developers will also benefit from this unit when clearing
pastures or new development areas. The SC6072 Skid
Cutter utilizes the power, compact size, and the go
anywhere ability of an SVL75 to access over grown areas
where a tractor and rotary cutter cannot go. The wide,
full-length tapered skid shoes prevent the cutter from
digging in or getting hung up in the soft ground usually
found under heavy brush.
Patent-Pending
This skid cutter is patent pending.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator’s or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com.
•
Store your Operator’s Manual in the dry storage tube.
See
on this page for location of storage
tube.
Terminology
“Right” or “left” as used in this manual is determined by
the direction the operator faces while sitting looking
forward in the operator’s seat unless otherwise stated.