Kubota 50740, Руководство по эксплуатации

Страница: 167 / 194

Maintenance
RG268-8135-6
165
01/2019
Air filter element - change

Open the engine compartment cover (page 144).

Open the clips (3) and remove the cover (4).

Clean cover and dust valve (5).

Pull the outer filter element (2) out of the air filter case (6).

Clean the air filter case without removing the inner filter ele-
ment (1).

Remove inner filter element after cleaning the air filter case and
immediately insert a new filter element.

Insert new outer filter element.

Close the cover with the TOP mark facing up. Then lock the braces.

Close the engine compartment cover.
Pilot circuit filter - change

Open the engine compartment cover.

Remove the screws (1).
Risk of engine damage!
The interior filter element (1) must remain installed while cleaning the air filter case (6). Otherwise,
particles of dirt could enter the air intake duct while cleaning and damage parts of the injection sys-
tem and engine.
Dispose of old filter elements according to the applicable environmental protection regulations.
Pay attention to utmost cleanliness when servicing the
hydraulic system.
1 2 3
4
5 6
1