162
RG268-8135-6
01/2019
Maintenance
Hydraulic oil - fill
Filling quantity with oil change:
approx. 34 l
Total hydraulic system capacity:
42 l
Unscrew the breather filter (1) from the cap (3).
Insert a clean funnel with a strainer into the fill opening (2).
Add hydraulic oil up to the centre of the sight glass
(figure below, position/1).
Screw the breather filter into the cap tightly by hand.
Start the excavator and operate all control functions.
Extend the hydraulic cylinders for the boom, arm and bucket
halfway.
Extend the boom swing mechanism to the centre position.
Lower the dozer onto the ground.
Check the oil level in the sight glass (1).
The oil level should be 1/2 to 3/4 of the way up the sight glass.
Carefully check the position of the hydraulic cylinders again be-
fore topping up the oil..
Close the side cover.
1
3
2
1
Содержание 50740
