Kubota 21400001, Руководство пользователя

Страница: 22 / 44

OPERATION
OM 0427SB-A [19]
A
DJUSTMENTS
CAUTION
: To ensure safety, make
sure tractor engine and snowblower come
to a complete stop and tractor drive
mechanism is disengaged BEFORE making
any adjustments.
Deflector Adjustment
The deflector angle must be set according to
the distance the snow must be thrown. To
adjust the angle:
•
Turn the chute to the right as far as possible.
•
Remove hairpin from adjustment tube and
adjust the deflector with the adjustment rod.
•
Reinsert hairpin in adjustment tube.
Auger Drive Chain Adjustment
(Figure 7)
To adjust the tension on the drive chain,
loosen the bolt (item 1), securing the idler
sprocket to the snowblower housing. To
tighten the chain, lower the bolt. Leave
approximately 1/4" to 1/2" deflection in one
span of the chain. Retighten securely the bolt
holding the idler sprocket.
Skid Shoe Adjustment
(Figure 7)
Adjust the skid shoes so that the snowblower
runs level and according to the surface
conditions so that stones are not thrown with
the snow.
Adjust both skid shoes to the same height to
keep the cutting edge level and adjust
upwards for smooth surfaces.
Loosen skid shoe bolts (item 2) and adjust
according to instructions below, and securely
tighten bolts:
Clearance between cutting edge and
surface:
•
Level paved surface:
Adjust to lower hole
•
Slightly eneven surface:
Adjust to middle hole
•
Uneven or gravel surface:
Adjust to upper hole
Figure 7