Kubota 21400001, Руководство пользователя

Страница: 17 / 44

ASSEMBLY
OM 0427SB-A [14]
IMPORTANT
: It is very important to
follow these next instructions to avoid
contact with the snowblower driveline
and damaging it.
NOTE: Perform this procedure only on a
clear area.
7. Figure 5-5a: With the male driveline
(item 1) on its support rod (item 2)
approach the tractor to around 2 feet
from the snowblower. Lower the tractor
4 point hitch (item 3) to about 1/4" to 2"
from the ground.
8. Carefully move the tractor forward,
making sure to position the inside of the
tractor 4-point hitch towards the outside
of the two UHMW hitch protectors of the
snowblower 4-point hitch.
9. Hook up the snowblower, making sure
the left and right hooks of the tractor 4-
point hitch are well connected to the
pins of snowblower 4-point hitch. Raise
the snowblower completely with the
tractor hydraulic lever.
10. Turn off tractor engine, set parking
brake and remove the ignition key.
11. Figure 5c: Release the pin (item 1) on
each side of the 4 point hitch.
NOTE: If the pins do not insert into the
snowblower lower bushings, the
snowblower is not properly set into the 4
point hitch. Restart previous steps 7 to 9.
12. Figure 5b: Remove the male driveline
from its storage support. Secure the
support rod (item 1) on the side of the
PTO guard (item 2).
CAUTION:
DO NOT WORK with
the driveline placed on its support, to
not damage the driveline or other parts.
Figure 5a
Figure 5
Figure 5b