CAB INSTALLATION
16 of 29
Fig. 18.1d (under seat filler, right fender)
Fig. 18.1c (underseat filler installation)
Fig. 18.1e (under seat filler, left fender)
STEP 18: (UNDERSEAT FILLER,
STANDARD CAB)
For Standard Cab only.
If installing a premium cab, proceed to step 19 on the
next page.
18.1
Move and tip the seat forward. Figures 18.1a and
18.1c thru 18.1e show the underseat filler. Begin by
doing a dry fit to get a feel for where all areas fit best
(underseat filler edges highlighted in white for clarity).
Start by lining up straight edge
“
A
”
(in fig. 18.1a) with
the stitched
-
on Velcro
(“
A
”
in fig. 18.1b) found on the
rear curtain. Apply the corresponding Velcro where
deemed necessary and to match the Velcro on the vinyl
filler. Do not cover up any factory decals.
Note: slots
are for seat belts to pass through on non
-
TLB vehicles
only.
Fig. 18.1a (underseat filler)
Fig. 18.1b (rear curtain
-
inside surface)
do not
cover
decals
“
A
”
rear
left
side
edge
“
A
”
seat belt slots
“
A
”