R60726.0002 – Index 4
EN - page 17
4.2
Screen structure in operation
The following screens are available during operation. Depending on the device version and the selected
operation mode, not all displays will be shown.
The source (IN1, IN2, …) for the single channel display and the two channel display are defined in the
DISPLAY MENU.
Single line display with unit and status bar
To switch to the next display,
press the touch screen.
Control - or Relay status are only shown
with Option Analog-, Control-, Relay-
Output.
Two-line display
To switch to the next display, press the top
of the screen.
Display for quick start for enter
preselection values (PRESELECT VALUES)
To switch to the next display, press the top
of the screen or the “skip” button.
This is only possible with Option Analog-,
Control- and / or Relay-Output.
Display with actual / minimum /
maximum values of input 1 and input 2
To switch to the next display, type on the
touch screen.
