Kübler CODIX 555, Руководство пользователя, Страница: 58 / 124

Page 26 www.kuebler.com
55..66..22..11 R Re esse ett M Miin niim mu um m vva allu ue e
Menu <–> Selection
Example: Yes
not resettable
resettable via the key.
The MIN value can only be cleared by pressing the red key. In addition "MIN"
must be selected as the display source. In parameter set-up "r.MIN" must be
programmed as "YES"
55..66..33 E Effffe ec cttss rre essu ullttiin ng g ffrro om m e exxc ce ee ed diin ng g tth he e m me ea assu urriin ng g rra an ng ge e lliim miittss o orr o off
O Ovve errllo oa ad d//U Un nd de errllo oa ad d o on n M MIIN N//M MA AX X..
If the signal measured lies outside the
measuring range limits or
then the current measured
value will be recorded either as a MIN
value or as a MAX
value . If the signal is in an
overload or underload condition, then it
will be saved either as as a MIN value
or as a MAX value
. .
55..77 M Ma aiin nss H Hu um m FFiilltte err
To reduce the interference from mains line and the environment (mains hum), the instru-
ment must be set to the local mains frequency.
Menu <–> Selection
Local power line 60 Hz
Local power line 50 Hz
55..88 IIn ntte errffa ac ce e
As an option the instrument can be sup-
plied with a serial interface, either RS232,
RS485 or RS422. Using a PC, then all the
unit's parameters can be read or pro-
grammed via this interface. A more detailed description of the com-
mands can be found in the separate in-
struction manual "CODIX 55x Interfaces".
This manual is supplied with units having
an interface. When the unit is powered
up, then the type of interface will appear
in the display for approx. 2 sec.
press the key to accept the selection
press the key
to accept