Kübler CODIX 555, Руководство пользователя, Страница: 44 / 124

Page 12 www.kuebler.com
55..22..33C Ch ha an ng giin ng g tth he e R Ra an ng ge e LLiim miittss
The given limits for the input range can be
entered as is, or adjusted.
Parameter Parameter
Possible range of values
Possible range of values
0 .. 10 V –0.500 ... 10.500 –0.500 ... 10.500
2 .. 10 V 01.500 ... 10.500 01.500 ... 10.500
-10 .. +10 V –10.500 ... 10.500 –10.500 ... 10.500
0 .. 20 mA –1.000 ... 21.000 –1.000 ... 21.000
4 .. 20 mA 03.000 ... 21.000 03.000 ... 21.000
If the measured signal falls below or ex-
ceeds the programmed value, then the
display alternates between
and
the measured value or between
and the the measured value.
Setting values out of the range is not pos-
sible. It is only possible to continue with
the set-up, using the
key, when the
settings are correct.
When the signal drops below the value
set here, then the signal alternates with
the message
U
Un nd de err--rra an ng ge e:: if the signal is less then
–13,60 V than appears in the
display.
Current values < 0.0 mA will not be
measured.
When the signal exceeds the value set
here, then the signal alternates with the
message
O Ovve err--rra an ng ge e if the signal is higher than
11.00 V or 21.5 mA, then
appears in the display..
Menu <–> Selection
Example: –5.000
Select digit
Set digit
Select digit
Set digit
Menu <–> Selection
Example: 9,000
Select digit
Set digit
LLo ow we err lliim miitt
U Up pp pe err lliim miitt
press the key to accept the selection
press the key to accept the selection