background image

25

5

   Heavy boots

6

   Gloves made from tear resistant materials (leather or kevlar)

7

   Motorcycle jacket from tear resistant materials (leather or Kevlar)

8

   Clothing that is brightly colored so other motorists and traffic participants can see you

 

WARNING: THE RIDER MUST WEAR PROTECTIVE EQUIPMENT, ESPECIALLY HELMET, 

BOOTS AND EYE PROTECTION.

HELMETS

There is no single factor that works best for reducing the severity of injuries sustained in accidents 

more than a quality helmet. Do not ever ride your KUBERG motorcycle without wearing a helmet. 

CLOTHING

Professional riding equipment and/or motorcycle leathers along with padded protection for 

knees, back and arms can prevent abrasion injuries in the event of a fall. Failure to use appropri-

ate safety equipment greatly increases the likelihood of serious injury or death in the event of an 

accident.

   Never wear loose-fitting clothes, otherwise they could catch on wheels, chains, control levers 

or footrests. 

   Do not wear shoes with laces as these can get caught in motorcycle’s chain or wheels and 

result in a serious injury.

   Boots should not have laces.

ACCESSORIES

Adding accessories or cargo to your KUBERG motorcycle can negatively affect its stability and 

handling. To avoid the risk of an accident, use extreme caution when adding accessories or cargo 

to your KUBERG bike. Use additional care when riding with added accessories or cargo.

  

CAUTION!

The total weight of the rider, accessories and cargo must not exceed the maximum load limit. 

 

WARNING!

Never attach any large or heavy items to the handlebar, front fork, or front fender.

Genuine KUBERG accessories have been specifically designed for use on this motorcycle. Since 

KUBERG cannot test all other accessories that may be available, you are personally responsible 

for the proper selection, installation and use of non-KUBERG accessories. Use extreme caution 

when selecting and installing any accessories.

Содержание X-FORCE PRO 50 2017





























Отзывы: