KU Solar SKY PRO 10 CPC 58 Скачать руководство пользователя страница 5

Страница: 5 / 50

SKY PRO 1800 FORCED CIRCULATION MANUAL

1. Introduction

1.1 Documentation

This installation and commissioning manual contains important information for the operation and

maintenance of the Kloben solar energy systems.

It is recommended to hand over this documentation, which contains the system assembly and maintenance

instructions, to end user. S/he is responsible for its preservation in order for it to always be available when

needed. Install the solar system according to the assembly instructions included in the individual products

supplied.

1.2 Supply

The collectors and accessories must be handled with care when transported and/or stored. Should the

packaging be damaged during transport, contact the carrier immediately, taking note of the circumstances on

the delivery note and ensuring this is countersigned be the delivery person. Do not remove the packaging

anyway and maintain the delivered goods in unaltered conditions, until an assessment of the damage

caused is implemented by the courier company. Should the goods received be intact, verify that the

assembly kit is complete before starting the installation. The packaging material must be disposed of

adequately following the installation.

Содержание SKY PRO 10 CPC 58



















































Результаты поиска

Содержание SKY PRO 10 CPC 58

Отзывы:

Похожие инструкции для SKY PRO 10 CPC 58

Бренды по названию

Популярные бренды

KU Solar SKY PRO 10 CPC 58, Техническое руководство

Результаты поиска

Содержание SKY PRO 10 CPC 58

Отзывы:

Похожие инструкции для SKY PRO 10 CPC 58

Бренды по названию

Популярные бренды