“More than just Digital”
Page
29
of
81
Doc. Name: PEDRA User’s Manual/Doc. No.: PEDRA-1417M-UM
Initiate date: 2020.07.25 /Revision date: 2020.10.15 (Rev. 1)
Make sure that the battery pack is securely attached.
The remaining battery charge can be checked on the monitor of viewer.
You can use the detector while charging the battery by connecting tether interface.
Charging Source
Charging (quantity)
Charging Time
Charger
1 battery pack
4hrs
Tether Interface
1 battery pack
10hrs
How to detach the battery pack
Turn off the detector
Press and hold the POWER button. (approx. 1.0 seconds) All the LED lamps are off.
Remove the battery pack
While holding down the battery pack, slide the lock levers as shown below (unlock) (1), put your
fingers on the battery pack edge that lifts up, and then pull the edge to remove the battery pack (2).
