KTR GEARex DA, Инструкция по эксплуатации и сборке

Страница: 2 / 36

GEARex
®
Operating/Assembly instructions
KTR-N
Sheet:
Edition: 40310 EN
2 of 36
15
Please observe protection
note ISO 16016.
Drawn: 2019-09-19 Pz/Wb Replacing: KTR-N dated 2017-01-02
Verified: 2019-09-19 Pz Replaced by:
The GEARex
®
all-steel gear coupling is a flexible shaft connection. It is able to compensate for shaft
misalignment, for example caused by manufacturing inaccuracies, thermal expansion, etc.
1 Technical data 4
2 Advice 8
2.1 General advice 8
2.2 Safety and advice symbols 8
2.3 General hazard warnings 8
2.4 Intended use 9
2.5 Coupling selection 9
2.6 Reference to EC Machinery Directive 2006/42/EC 9
3 Storage, transport and packaging 10
3.1 Storage of the coupling 10
3.2 Storage of O-rings 10
3.3 Transport and packaging 10
4 Assembly 10
4.1 Components of the couplings 11
4.2 Advice for finish bore 15
4.3 Assembly of the coupling (general) 16
4.4 Assembly of the types FA, FB, FAB, FH and FR 17
4.5 Assembly of types DA, DB, DAB, DH and DR 18
4.6 Displacements - alignment of the couplings 20
5 Start-up and lubrication 21
5.1 Start-up of the coupling 21
5.2 Types of grease recommended 22
5.3 Grease feeding 23
5.4 Grease capacity 23
6 Breakdowns, causes and elimination 24
7 Maintenance and service 27
7.1 Intervals of maintenance 27
7.2 Replacement of grease 27
7.3 Replacement of sealing elements 28
7.4 Standard values for circumferential backlash 29
7.5 Standard values of wear 30
7.6 Cleaning of the coupling 31
7.7 Replacement of coupling 31
7.8 Disassembly of the coupling 31
8 Disposal 32
9 Spares inventory, customer service addresses 32
Table of contents