Declaration of conformity
6. Maintenance and Care
Hazard
Accident risk due to moving machine parts when performing repairs.
For all repairs:
•
Switch off the machine at the main circuit breaker.
•
Pull out the mains power cable.
•
Disconnect the compressed air supply.
Information/tip
Avoid "rust spots" on all parts made from V2A-stainless steel.
Almost all components of the screw capping machine are made from V2A-
steel and do not "rust".
"
Rust spots" may form on the surface of V2A-parts if
items manufactured from other types of steel (e.g. tools) are placed on the
screw capping machine.
To prevent this occurring on V2A-steel parts:
•
do not place down any items manufactured from other steels
•
use a suitable cleaning agent to remove
"rust spots".
After the work has been completed
•
Switch off the machine at the main circuit breaker and pull out the mains
power cable.
•
Interrupt the compressed air supply.
•
Drain the condensation from the water separator and dispose of in an
appropriate manner.
Also open the cover at the rear of the machine
and open the drain tap on the air reservoir to drain off the
condensation
.
•
Clean the cap container using a damp cloth.
•
Spray the capping head using a Teflon spray or food-safe grease spray
(e.g. Biolup).
!
i