KTM Freeride E-XC 2018, Руководство пользователя

Страница: 51 / 146

11 TUNING THE CHASSIS
49
11.13 Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
C00795-10
–
Turn adjusting screws
1
clockwise all the way.
Info
Adjusting screws 1 are located at the top end of the
fork legs.
Make the same adjustment on both fork legs.
–
Turn back counterclockwise by the number of clicks corre-
sponding to the fork type.
Guideline
Rebound damping
Comfort 20 clicks
Standard 15 clicks
Sport 10 clicks
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping.
11.14 Handlebar position
0 0
C00762-10
On the upper triple clamp, there are two holes at a distance of A
to each other.
Hole distance
A
15 mm (0.59 in)
The holes on the handlebar supports are placed at a distance
of
B
from the center.
Hole distance
B
3.5 mm (0.138 in)
The handlebar supports can be mounted in four different posi-
tions.
11.15 Adjusting the handlebar position
Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged or bent.
Preparatory work
–
Deactivate the vehicle. ( p. 37)
–
Fold the seat up. ( p. 63)
–
Remove the KTM PowerPack. ( p. 102)
–
Mount the covering cap. ( p. 65)