KTM Freeride E-XC 2018, Руководство пользователя

Страница: 64 / 146

12 SERVICE WORK ON THE CHASSIS
62
C00701-10
Main work
–
Remove screw 1 .
–
Remove screw
2
and lower the rear wheel with the swing arm
as far as possible without blocking the rear wheel. Fix the rear
wheel in this position.
–
Remove screw
3
.
–
Push the splash protector 4 to the side and remove the
shock absorber.
12.17 Installing the shock absorber
C00701-11
Main work
–
Push splash protector
1
to the side and position the shock
absorber.
–
Mount and tighten screw
2
.
Guideline
Screw, top
shock absorber M12 80 Nm (59 lbf ft)
Loctite ® 2701™
–
Mount and tighten screw
3
.
Guideline
Screw, bottom
shock absorber M12 80 Nm (59 lbf ft)
Loctite ® 2701™
Info
The heim joint for the shock absorber at the swingarm
is Teflon-coated. It must not be greased with grease,
nor with any other lubricants. Lubricants dissolve the
Teflon coating, thereby drastically reducing the service
life.
–
Mount and tighten screw 4 .
Guideline
Screw, upper
subframe M10 45 Nm (33.2 lbf ft)
Loctite ® 243™
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 51)
–
Install the KTM PowerPack. ( p. 103)
–
Lock the seat. ( p. 63)