KTM Freeride 350, Руководство пользователя

Страница: 95 / 113

TROUBLESHOOTING
93
Faults Possible cause Action
FI warning lamp ( MIL ) lights
up/flashes
Defect in fuel injection system
–
Stop the motorcycle and identify the faulty part
using the blink code.
Info
See blink code
–
Check the cabling for damage and the connec-
tors for corrosion and damage.
–
Read out the fault memory using the KTM diag-
nostics tool.
x
High oil consumption Engine vent hose bent
–
Route the vent hose without bends or change it
if necessary.
Engine oil level too high
–
Check the engine oil level. ( p. 85)
Engine oil too thin (low viscosity)
–
Change the engine oil and oil filter, clean the
oil screen.
x ( p. 86)
Piston and cylinder worn
–
Piston/cylinder - determine the mounting clear-
ance.
x
Battery is discharged Battery is not being charged by alter-
nator
–
Check the charging voltage.
x
–
Check the stator winding of the alternator.
x
Unwanted power consumer
–
Check the quiescent current.
x
Speedometer values deleted (time,
stop watch, lap times) The battery in the speedometer is
discharged
–
Change the speedometer battery. ( p. 78)
The high beam, low beam, parking
light, tail light, and license plate
lamp are not working Fuse 3 blown
–
Change the fuses of individual power
consumers. (
p. 74)
The speedometer, horn, brake light,
turn signal, and radiator fan are not
functional Fuse 4 blown
–
Change the fuses of individual power
consumers. (
p. 74)