KTM Freeride 250 R 2016, Инструкции по установке

Страница: 10 / 23

3 SERVICE WORK ON THE CHASSIS
8
Guideline
Screw, bottom shock
absorber M12 80 Nm
(59 lbf ft) Loctite ® 2701™
Info
The heim joint for the shock absorber at the swingarm is Teflon coated. It
must not be greased with grease or with any other lubricants. Lubricants
dissolve the Teflon coating, thereby drastically reducing the service life.
–
Mount and tighten screw  .
Guideline
Screw, upper subframe M10 45 Nm
(33.2 lbf ft) Loctite ® 243™
Finishing work
–
Lock the seat. ( p. 9)
–
Remove the motorcycle from the lift stand. ( p. 7)
3.5 Installing the front wheel
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
B01046-11
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the front wheel bearing.
–
Clean and grease the shaft seal rings

and contact surface

of the spacers.
Long-life grease ( p. 19)
–
Insert the spacers.
B02290-11
–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw

.
Guideline
Screw, front wheel spindle M20x1.5 35 Nm
(25.8 lbf ft)
–
Activate the hand brake lever multiple times until the brake linings are in contact
with the brake disc.
–
Remove the motorcycle from the lift stand. ( p. 7)
–
Pull the front brake and compress the fork forcefully a few times.
The fork legs straighten.
–
Tighten screw

.
Guideline
Screw, fork stub M8 15 Nm
(11.1 lbf ft)