3
SERVICE WORK ON THE CHASSIS
14
3.15
Refitting the headlight mask with the headlight
602812-11
Main work
(EU/AU)
–
Connect the plug-in connectors
for the turn signals and
for the head-
light.
M01036-11
(US)
–
Connect plug-in connector
of the headlight.
M01037-10
–
Position the headlight mask and secure it with rubber straps
.
The holding lugs on the fender engage in the headlight mask.
–
Attach the brake line and wiring harness
.
Finishing work
–
Check the headlight setting. (
3.16
Checking the headlight setting
0
0
A
A
0
0
B
B
400726-10
–
Position the vehicle upright on a horizontal surface in front of a light wall and make
a mark at the height of the center of the low beam headlight.
–
Make another mark at a distance
under the first mark.
Guideline
Distance
5 cm (2 in)
–
Position the vehicle vertically at a distance
away from the wall.
Guideline
Distance
5 m (16 ft)
–
The rider now sits down on the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with driver.
