KTM F9903R6, Инструкции по установке

Страница: 7 / 25

SETUP 2
5
F01010-10
–
Mount reflector
1
with spring washers
2
on holding
plate
3
.
–
Mount the holding plate on the license plate bracket.
(all EU/JP/CN models)
–
Mount the license plate holder.
(US)
–
Bond the reflectors on the right and left side of the reflec-
tor holder.
–
Mount the reflector holder on license plate bracket.
–
Carefully loosen and remove the tension belt over the
swingarm.
Guideline
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tension belts around the lower
triple clamp.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off the palette.
F00999-10
–
Remove radiator shield 4 .
–
Remove screws
5
.
–
Position radiator guard.
Info
Pay attention to the guides and the holding lugs.
–
Mount and tighten screws
5
.
Guideline
Screw, cooler retain-
ing bracket M6 7 Nm (5.2 lbf ft)
–
Mount and tighten screws
6
.
Guideline
Screw, cooler retain-
ing bracket M6 7 Nm (5.2 lbf ft)
F00998-10
–
Mount rubber dampers
7
on the engine guard.
–
Position engine guard. Mount and tighten the screws with the
distance sleeves.
Guideline
Screw, engine guard M6 10 Nm (7.4 lbf ft)