KTM F9903R6, Инструкции по установке

Страница: 10 / 25

2 SETUP
8
F01008-10
–
Unplug connector
cl
.
H02004-10
–
Apply radio certification sticker to the rear of the combina-
tion instrument in area
C .
Info
If the function KTM MY RIDE is enabled, the sticker
must be applied.
If the function
KTM MY RIDE is not enabled or has
been disabled, the sticker must not be applied.
–
Plug in connector
cl
.
–
Mount and tighten screws ck with the sleeves.
Guideline
Screw, combination
instrument M5 4.5 Nm
(3.32 lbf ft)
Tip
Adjust the tilt of the combination instrument
accordingly.
–
Position the headlight mask.
–
Mount and tighten screws
bt
.
Guideline
Screw, cover part M5x12 3.5 Nm
(2.58 lbf ft)
–
Install the wind shield. ( p. 9)
–
Remove the Race-on key from the storage compartment and
keep in a safe place for the handover.
–
Remove the seat. ( p. 9)
–
Remove the black ignition key and the KEYCODECARD from
under the seat and keep in a safe place for the handover.
–
Recharge the battery. ( p. 9)
–
Remove the remaining films.
–
Check the headlight setting. ( p. 14)
–
Refuel. ( p. 17)
–
Prepare the vehicle according to the specifications in the
KTM Dealer.net
for handover to the customer.