KTM F9903R6, Инструкции по установке

Страница: 16 / 25

3 WORK
14
3.8 Checking the headlight setting
400726-10
–
Park the vehicle on a horizontal surface in front of a light-
colored wall and make a mark at the height of the center of
the low beam headlight.
–
Make another mark at a distance
B
under the first marking.
Guideline
Distance B
5 cm (2 in)
–
Position the vehicle perpendicular to the wall at a distance A
from the wall and switch on the low beam.
Guideline
Distance
A
5 m (16 ft)
–
The rider, with luggage and passenger if applicable, now
mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower
mark when the motorcycle is ready to operate with the
rider mounted along with any luggage and a passenger if
applicable.
» If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range. ( p. 14)
3.9 Adjusting the headlight range
Preparatory work
–
Check the headlight setting. ( p. 14)
F00892-10
Main work
–
Turn adjusting wheel
1
to adjust the headlight range.
Info
Turn counterclockwise to increase the headlight range;
turn clockwise to reduce the headlight range.
If you have a payload, you may have to correct the
headlight range.
400726-11
–
Set the headlight to marking B .
Guideline
The light-dark boundary must lie exactly on lower mark
B
when the motorcycle is ready to operate with the rider
mounted along with any luggage and a passenger if applica-
ble.