KTM F3001P2 2016, Инструкции по установке

Страница: 11 / 29

4 SERVICE WORK
9
4.1 Raising the motorcycle with the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
Preparatory work
–
Deactivate the vehicle. ( p. 9)
–
Fold the seat up. ( p. 12)
–
Remove the KTM PowerPack. ( p. 17)
(Option: HV 2 technical personnel)
–
Ascertain that the KTM PowerPack is at zero potential. ( p. 22)
–
Ascertain that the discharge plug is de-energized. ( p. 22)
–
Mount the covering cap. ( p. 10)
401942-01
Main work
–
Use the motor guard underneath the motor to raise the vehicle.
Lift stand (78929955100)
The wheels are no longer in contact with the ground.
–
Secure the motorcycle against falling over.
4.2 Removing the motorcycle from the lift stand
Note
Danger of damage
The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
401943-10
Main work
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand

to the ground with your foot and lean
the motorcycle on it.
Finishing work
–
Install the KTM PowerPack. ( p. 18)
(Option: HV 2 technical personnel)
–
Perform an equipotential bonding check (KTM PowerPack installed).
( p. 23)
–
Lock the seat. ( p. 13)
4.3 Deactivating the vehicle
C00793-01
–
Push the main switch into the position .