KTM bikepass, Руководство пользователя

Страница: 14 / 36

14
The saddle is correctly adjusted when your heel
reaches the pedal (when the pedal is at the lowest
point) while your leg is completely straight. When
you are pedaling your leg should be bent at the
knee. See Image 1.
While adjusting the height
pay attention that the seat
post does not exceed the
maximum extension
(see image 2)
If the seat post is not correct-
ly inserted this may cause a
fall or a broken frame.
If it is not possible to adjust
the height this way, choose a
larger frame.
A guideline to find your
frame-size can be found in
our catalogue or on
www.ktm-bikes.at/service
The saddle should be assembled in horizontal po-
sition. You can use a water level to optimize your
adjustment (image 3). The area in which the saddle
rails should be clamped is marked on every sadd-
le. Make sure you do not clamp the saddle outside
the marking.
Use the given torques you can find on the saddle rails/
Saddle Adjustment Important information
Image 1
Image 2