KTM 990 SUPER DUKE, Инструкции по установке

Страница: 7 / 17

2 SETUP
5
101260-10
–
Insert connector
3
into the starter relay.
–
Recharge the battery. ( p. 7)
101261-10
–
Remove the seat. ( p. 6)
–
Secure tool set
4
with the rubber holder.
–
Remove the protective film from the seat.
–
Mount the seat. ( p. 6)
101262-01
–
Carefully loosen and remove the tensioning belt over the swingarm.
Info
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tensioning belts around the lower triple clamp.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off of the palette.
–
Remove the protective plastic.
–
Install the front spoiler. ( p. 9)
–
Refuel. ( p. 10)
–
Print out the current PDI form found on KTM DEALER.NET and perform the delivery
inspection.
–
Set kilometers or miles. ( p. 11)
–
Set the clock. ( p. 11)