KTM 990 SUPER DUKE, Инструкции по установке

Страница: 13 / 17

3 WORK
11
400970-12
–
Press the SET button
2
for two seconds.
The low fuel warning lamp
1
goes out. TRIP F is set to 0.0 and the display
returns to the previous display mode.
Info
If the
SET
button
2
is not pressed, the value is automatically reset after
approx. 3 minutes.
3.11 Setting kilometers or miles
Info
If you change the unit, the value ODO is retained and converted accordingly.
Making the setting according to the country.
Condition
The motorcycle is stationary.
400893-10
–
Switch on the ignition by turning the ignition key to the ON position.
–
Press the MODE button repeatedly until the ODO mode is active.
–
Keep the MODE button pressed until the display mode changes from km/h to mph or
from mph to km/h .
3.12 Setting the clock
Condition
The motorcycle is stationary.
400893-12
–
Switch on the ignition by turning the ignition key to the
ON
position.
–
Press the MODE button repeatedly until the ODO mode is active.
–
Keep the MODE button and the SET button pressed simultaneously.
The time display begins to flash.
–
Press the MODE button to set the hour.
–
Press the SET button to set the minute.
–
Keep the MODE button and the SET button pressed simultaneously.
The time is set.
3.13 Installing the front spoiler
0 0 0 1 1
1 1
2 2
B00245-10
–
Position the front spoiler.
–
Mount and tighten screws
1
with the washer.
Guideline
Screw, front spoiler M6 10 Nm
(7.4 lbf ft) Loctite ® 243™
–
Fully tighten screws
2
.