ERGONOMICS 8
61
8.1
Setting the front rider's seat
Preparatory work
–
Remove the passenger seat. (
–
Remove the front rider's seat. (
401678-10
Alternative 1
–
Attach the front rider's seat to the fuel tank at the
recesses
1
, and push the front rider's seat down and
forward at the same time.
401679-10
Alternative 2
–
Attach the front rider's seat to the fuel tank at the
recesses
1
, and push the rider's seat up and forward at
the same time.
–
Finally, check that the front rider's seat is correctly mounted.
Finishing work
–
Mount the passenger seat. (
8.2
Handlebar position
F01906-10
On the upper triple clamp, there are three holes at a distance
of
A
to each other.
The holes on the handlebar support are placed at a distance of
B
from the center.
Hole distance
A
15 mm (0.59 in)
Hole distance
B
3.5 mm (0.138 in)
The handlebar can be mounted in six different positions. This
allows the handlebar to be mounted in the most comfortable posi-
tion for the rider.
8.3
Adjusting the handlebar position
Warning
Danger of accidents
A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged or bent.