BRAKE SYSTEM 14
107
Note
Environmental hazard
Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid corrodes paint.
Only use clean brake fluid from a sealed container.
Preparatory work
–
Check the front brake linings. (
F03383-10
Main work
–
Move the brake fluid reservoir mounted on the handlebar to a
horizontal position.
–
Remove screws
1
.
–
Take off cover
2
with membrane
3
.
–
Add brake fluid up to the marking
A
.
Brake fluid DOT 4 / DOT 5.1 (
–
Position cover
2
with membrane
3
.
–
Mount and tighten screws
1
.
Guideline
Brake fluid reservoir
cover, front
-
1 Nm (0.7 lbf ft)
Info
Use water to immediately clean up any brake fluid that
has overflowed or spilled.
14.5
Checking the front brake linings
Warning
Danger of accidents
Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
Warning
Danger of accidents
Damaged brake discs reduce the braking effect.
If the brake linings are not changed in time, the brake lining carriers grind against the brake disc. As a
consequence, the braking effect is greatly reduced and the brake discs are destroyed.
–
Check the brake linings regularly.
