KTM 690 Enduro R EU Скачать руководство пользователя

Страница: 22 / 105

OPERATING ELEMENTS

4.35

Steering lock

600103-10

The steering lock



is fitted on the left of the steering head.

The steering lock is used to lock the steering. Steering, and therefore riding, is no
longer possible.

4.36

Locking the steering

Note

Danger of damage

Danger of damage by the vehicle running away or falling over.

–

Always place the vehicle on a firm and even surface.

–

Park the motorcycle.

–

Turn the handlebar as far as possible to the right.

–

Insert the key in the steering lock, turn it to the left, press it in and turn it to the right. Remove the key.

Steering is no longer possible.

Info

Never leave the key in the steering lock.

4.37

Unlocking the steering

–

Insert the key in the steering lock, turn it to the left, pull it out and turn it to the right. Remove the key.

You can now steer the bike again.

Info

Never leave the key in the steering lock.

4.38

Tool set

600104-10

The tool set



is contained in the accessories box and can be stored in the compart-

ment beneath the additional lamps.

4.39

Handrail

600009-10

There ios one handrail



attached at the left and one at the right (at the rear tank).

The handrail is used for shunting the motorcycle.

Содержание 690 Enduro R EU










































































































Результаты поиска

Содержание 690 Enduro R EU

Отзывы:

Похожие инструкции для 690 Enduro R EU

Бренды по названию

Популярные бренды

KTM 690 Enduro R EU, Руководство пользователя

Результаты поиска

Содержание 690 Enduro R EU

Отзывы:

Похожие инструкции для 690 Enduro R EU

Бренды по названию

Популярные бренды