KTM 690 ENDURO AUS/UK 2008, Руководство пользователя

Страница: 143 / 179

TROUBLESHOOTING
141
10 TROUBLESHOOTING
Faults Possible cause Action
Engine does not turn when the electric
starter button is pressed Operating error
–
Carry out the instructions for starting.
( P. 43)
Battery discharged
–
Recharge the battery. x ( P. 105)
–
Check the cause of discharging.
Fuse 1 , 2 , 3 , or 4 blown
–
Change the fuses of individual power
consumers. (
P. 109)
Main fuse burned out
–
Change the main fuse. ( P. 107)
Ignition/steering lock or emergency OFF
switch defective
–
Have ignition/steering lock or emergency
OFF switch checked.
Defect in safety start system
–
Have the safety start system checked.
Engine turns only if the clutch lever is
drawn The vehicle is in gear
–
Shift gear to neutral.
The vehicle is in gear and the side stand is
folded out
–
Shift gear to neutral.
Defect in safety start system
–
Have the safety start system checked.
Engine turns although a gear is engaged Defect in safety start system
–
Have the safety start system checked.
Engine turns but does not start. Operating error
–
Carry out the instructions for starting.
( P. 43)
Fuse 4 blown
–
Change the fuses of individual power
consumers. (
P. 109)
Coupling of fuel hose connection not con-
nected
–
Reconnect coupling of fuel hose connec-
tion.
Socket connector of cable harness oxidized
–
Clean socket connector and treat it with
contact spray.
Defect in fuel injection system
–
Read the error memory with the KTM
diagnostics tool and correct the fault.
Engine has too little power. Air filter very dirty
–
Have the air filter changed.