KTM 690 ENDURO AUS/UK 2008, Руководство пользователя

Страница: 119 / 179

MAINTENANCE WORK ON CHASSIS AND ENGINE
117
600612-10
–
Pull bulb socket

out of the reflector.
–
Pull parking light bulb

out of the bulb socket.
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Insert a new parking light bulb into the bulb socket.
Parking light (W2,1x9,5d) ( P. 158)
–
Insert the bulb socket into the reflector.
–
Insert the rubber cap.
–
Refit the headlight mask with the headlight. ( P. 114)
9.60
Changing the flasher bulb
Note
Damage to reflector Keep the glass of the bulb free of grease.
–
Clean the glass bulb with a clean cloth before mounting. Any grease on the glass will evaporate by the heat and be deposited on the
reflector.
100301-10
–
Remove the screw on the rear of the flasher housing.
–
Carefully swing the diffuser

forwards and remove it.
–
Lightly pinch the orange cap

at the holding points and remove it.
–
Press the flasher bulb carefully into the holder, turn it about 30° counterclockwise and
remove it from the holder.
Info
Do not touch the reflector with your fingers and try to avoid contact with oil or
grease.
–
Check parts for damage and wear. Replace damaged or worn parts.