KTM 690 DUKE AUS/UK 2009 Скачать руководство пользователя страница 76 | Manualshive

Страница: 76 / 176

KTM 690 DUKE AUS/UK 2009 Скачать руководство пользователя страница 76

MAINTENANCE WORK ON CHASSIS AND ENGINE

74

Note

Danger of accidents

Reduced braking due to damaged brake discs.

–

If the brake linings are not changed in time, the steel brake lining carriers grind on the brake disc. The braking effect is greatly
reduced and the brake discs are destroyed.

100137-10

–

Check the brake linings for minimum thickness



.

Minimum thickness



≥

1 mm (

≥

0.04 in)

» If the minimum thickness is less than specified:

–

Change the front brake linings.

x

–

Check the brake linings for damage and cracking.
» If there is wear or tearing:

–

Change the front brake linings.

x

9.24

Checking free play of foot brake lever

Warning

Danger of accidents

Brake system failure.

–

If there is no free travel on the foot brake pedal, pressure builds up on the rear brake in the brake system. The rear brake can
fail due to overheating. Adjust free travel on foot brake pedal according to specifications.

«
...
74
75
76
77
78
...
»

Содержание 690 DUKE AUS/UK 2009

















































































































































































Отзывы:

Нет отзывов