KTM 690 DUKE AUS/UK 2009 Скачать руководство пользователя страница 64

Страница: 64 / 176

MAINTENANCE WORK ON CHASSIS AND ENGINE

Info

The high-speed setting can be seen during the fast compression of the shock absorber.

700147-01

–

Turn adjusting screw



clockwise as far as it will go using an open end wrench.

Info

Do not loosen nut



–

Turn back counterclockwise by the number of turns corresponding to the shock
absorber type.
Guideline

Compression damping, high-speed

Comfort

2.5 turns

Standard

2.0 turns

Sport

1.5 turns

Full payload

1.5 turns

Info

Turn clockwise to increase damping, turn counterclockwise to reduce suspension
damping.

9.11

Adjusting the rebound damping of the shock absorber

Danger

Danger of accidents

The shock absorber is under high pressure.

–

The shock absorber is filled with highly compressed nitrogen, so never dismantle the shock absorber or carry out any mainte-
nance on it yourself.

Содержание 690 DUKE AUS/UK 2009

















































































































































































Результаты поиска

Содержание 690 DUKE AUS/UK 2009

Отзывы:

KTM 690 DUKE AUS/UK 2009, Руководство пользователя, Страница: 64 / 176

Результаты поиска

Содержание 690 DUKE AUS/UK 2009

Отзывы: