KTM 690 DUKE AUS/UK 2009 Скачать руководство пользователя страница 72

Страница: 72 / 176

MAINTENANCE WORK ON CHASSIS AND ENGINE

9.19

Checking brake discs

Warning

Danger of accidents

Reduced braking due to worn brake discs.

–

Worn brake discs should be replaced immediately in an authorized KTM workshop.

100135-10

–

Check the thickness of the front and rear brake discs in several places to ensure that it
conforms to measurement



Info

Wear reduces the thickness of the brake disc in the area



of the brake disc.

Brake discs - wear limit

Front

3.6 mm (0.142 in)

Rear

4.5 mm (0.177 in)

» If the brake disc thickness is less than the specified value:

–

Replace the brake disc.

–

Check the front and rear brake discs for damage, cracks, and deformation.
» If damage, cracks, or deformation are visible on the brake disc:

–

Replace the brake disc.

Содержание 690 DUKE AUS/UK 2009

















































































































































































Результаты поиска

Содержание 690 DUKE AUS/UK 2009

Отзывы:

KTM 690 DUKE AUS/UK 2009, Руководство пользователя, Страница: 72 / 176

Результаты поиска

Содержание 690 DUKE AUS/UK 2009

Отзывы: