ENGLISH
31
A
A
1
2
3
4
5
6
– Coat the thread of the screw
1
with Loctite 243 and mount the screw,
however, do not tighten it yet.
– Push the slide pin
2
inward. At the same time, push the slide lever
3
to
the extreme right and tighten the screw
1
.
– Now, the distances
A
on the left and on the right should be identical.
Then, turn the cable disc and check if the throttle valve moves smoothly.
– Mount the jet needle and secure it with the screw
4
.
– Position the slide cover and gasket and fasten with 2 screws.
– Connect the hose
5
.
– Insert the 2 hose connections into the bores and fasten them with the
retaining clip
6
.