KTM 65 SX 2017, Инструкции по установке

Страница: 7 / 14

3 WORK
5
V00219-11
–
Mount and tighten screw

.
Guideline
Screw, front wheel spindle M10 40 Nm
(29.5 lbf ft) Loctite ® 243™
–
Remove the motorcycle from the lift stand. ( p. 4)
V00248-10
–
Operate the hand brake lever several times until the brake linings are seated cor-
rectly against the brake disc.
–
Loosen screws

.
–
Operate the front brake and compress the fork a few times firmly.
The fork legs straighten.
–
Tighten screws

.
Guideline
Screw, fork stub M6 10 Nm (7.4 lbf ft)
3.4 Adjusting the handlebar position
Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a result.
–
Change the handlebar if the handlebar is damaged or bent.
601951-11
–
Remove screws

. Take off the handlebar clamps. Remove the handlebar and lay
it to one side.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not kink the cables and lines.
–
Remove screws

. Remove the handlebar support.
–
Place the handlebar support in the required position. Mount and tighten
screws

.
Guideline
Screw, handlebar support M10 40 Nm
(29.5 lbf ft) Loctite ® 243™
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamps. Mount screws

and tighten evenly.
Guideline
Screw, handlebar clamp M8 20 Nm
(14.8 lbf ft)
Info
Make sure the gap widths are even.