KTM 65 SX 2017, Инструкции по установке

Страница: 6 / 14

3 WORK
4
3.1 Raising the motorcycle with a lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
401942-01
–
Raise the motorcycle at the frame underneath the engine.
Lift stand (78929955100)
Neither wheel is in contact with the ground.
–
Secure the motorcycle against falling over.
3.2 Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
402581-10
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, insert plug-in stand

into the plug-in stand bracket on
the left side of the vehicle.
Info
Remove the plug-in stand before riding.
3.3 Installing the front wheel
Warning
Danger of accidents
Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
H00935-10
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the front wheel bearing.
–
Clean and grease shaft seal rings

and mating surfaces

of the spacers.
Long-life grease ( p. 10)
–
Insert the spacers.
V00247-10
–
Clean and grease wheel spindle  .
Long-life grease ( p. 10)
–
Position the front wheel.
The brake linings are correctly positioned.
–
Insert wheel spindle.
–
Tighten screws

.
Guideline
Screw, fork stub M6 10 Nm (7.4 lbf ft)