ENGLISH
29
MAINTENANCE WORK ON CHASSIS AND ENGINE
»
Main fuse
The main fuse
[1]
protects all power-consuming units on the motorcycle. It
is located below the seat at the starter relay.
For access to the fuse, remove the cover
[2]
. The capacity of the fuse is
20 A. A spare fuse can be found under the other cover
[3]
. When using the
spare fuse, remember to replace it as soon as possible so that a spare fuse is
always at hand. Replace a blown fuse only with an equivalent one. If a new
fuse that has just been set in gets blown again, you are strongly advised to
have it inspected by a KTM dealer. The fuse capacity is 20 Ampere.
– UNDER NO CIRCUMSTANCES IS A STRONGER FUSE ALLOWED TO BE SET IN
OR A FUSE ALLOWED TO BE „REPAIRED“. AN INEXPERT TREATMENT COULD
DAMAGE THE WHOLE ELECTRICAL INSTALLATION!
– CONTACT A SPECIALIZED KTM DEALER, SHOULD DEFECTS OF THE ELECTRIC
SYSTEM OCCUR MORE FREQUENTLY.
Fuses
Fuse box
[A]
is located under the seat.
See „Removing the seat“ to remove and mount the seat.
The fuses are numbered on the inside of the fuse box.
The fuses marked „RES“ are spare fuses.
Fuse 1 (10 Ampere) protects the following power-consuming units:
– ignition
– starter system
Fuse 2 (10 Ampere) protects the following power-consuming units:
– flasher lights
– brake light
– horn
– fan
Fuse 3 (10 Ampere) protects the following power-consuming units:
– headlight
– parking light
Replace a blown fuse only with an equivalent one. If a new fuse that has just
been set in gets blown again, you are strongly advised to have it inspected by
a KTM dealer.
UNDER NO CIRCUMSTANCES IS A STRONGER FUSE ALLOWED TO BE SET IN OR
A FUSE ALLOWED TO BE „REPAIRED“. AN INEXPERT TREATMENT COULD DAM-
AGE THE WHOLE ELECTRICAL INSTALLATION!
Opening the headlight mask
The headlight mask can be opened, thus providing easy access to headlight
lamps, instrument lights and indicator lamps.
Remove the screws
[4]
and take out the ignition key.
Lift the instrument cover in the area of the ignition lock, simultaneously
swinging the headlight mask forward.
The headlight mask can be swung forward until it rests against the fork legs.
To prevent damaging of painted surfaces, it is recommended to put a cloth
or similar material between the mask and the fork legs.
4
4
A
2
3
1
