ENGLISH
9
Compression damping of fork
Hydraulic compression damping determines the reaction when the fork is
compressed. The degree of compression can be adjusted with adjusting
screws at the bottom of the fork legs.
The damping rate of the compression damping mechanism can be readju-
sted at the adjusting screws
1
located at the fork leg. Turn it clockwise to
increase damping, and counterclockwise to reduce damping during com-
pression.
STANDARD ADJUSTMENT
– turn adjusting screw clockwise as far as it will go
– turn it back by as many clicks as are specified for the relevant type of
fork
WP 0518X732 . . . . . . . . . 14 clicks
Rebound damping of fork
Hydraulic rebound damping determines the reaction when the fork is
rebound. By turning the adjusting screw
2
(REB), the degree of damping of
the rebound can be adjusted. Turn the knob clockwise to increase damping,
turn it counterclockwise to reduce damping during rebounding.
STANDARD ADJUSTMENT
– turn adjusting screw clockwise as far as it will go
– turn it back by as many clicks as are specified for the relevant type of
fork
WP 0518X732 . . . . . . . . . 16 clicks
Compression damping of shock absorber
With the knob
3
the degree of damping of the compression can be adju-
sted to 7 positions. Turn the knob counterclockwise to increase damping,
turn it clockwise to reduce damping during rcompressing.
STANDARD ADJUSTMENT:
WP 0118X728 . . . . . . . . .position 3
Rebound damping of shock absorber
With the setting wheel
4
the degree of damping of the rebound can be
adjusted to 11 positions. Turn the knob to the left side to increase damping,
turn it to the right side to reduce damping during rebounding.
STANDARD ADJUSTMENT:
WP 0118X728 . . . . . . . . .position 5
Seat lock
The seat is secured by the lock on the side of the seat
5
1
1
2
2
3
4
5
