KTM 450 XC-W USA, Инструкции по установке

Страница: 7 / 31

2 SETUP
5
102049-11
(EXC EU, EXC Six Days EU, EXC AU, 500 EXC US)
–
Insert the indicator lamp with the black and violet cable colors into
socket

.
102048-11
(XC
‑
W)
–
Connect pull switch

with the yellow and white cables.
–
Position the speedometer and connector board. Mount and tighten the screws.
Guideline
Remaining screws, chassis M6 10 Nm
(7.4 lbf ft)
V00033-10
–
Position the controls on the right half of the handlebar.
Info
The routing of the throttle cables can be seen in the figure.
V00034-10
–
Position the controls on the left half of the handlebar.
Info
The figure shows how to route the clutch line and wiring harness.
B01749-01
(EXC EU, EXC Six Days EU, EXC AU, 500 EXC US)
–
Remove the fuel tank. ( p. 17)
–
Position the turn signal wiring harness against the main wiring harness and
secure with cable ties.
B01750-01
–
Disconnect the plug-in connection from the main wiring harness and con-
nect the turn signal wiring harness.
–
Install the fuel tank. ( p. 19)