KTM 250 EXC-F EU 2015, Инструкции по установке

Страница: 14 / 24

3 WORK
12
3.9 Installing the front fender
L02485-10
Main work
–
Position the front fender. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
B01603-11
–
Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Finishing work
–
Refit the headlight mask with the headlight. ( p. 9)
–
Check the headlight setting. ( p. 10)
3.10 Removing the seat
101346-10
–
Remove screw  .
–
Lift up the seat at the rear, pull it back and then remove it from above.
3.11 Mounting the seat
M00176-10
–
Hook in the front of the seat at the collar sleeve of the fuel tank, lower it at the rear
and simultaneously push it forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten the screw of the seat fixing.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)