KTM 250 EXC-F EU 2015, Инструкции по установке

Страница: 12 / 24

3 WORK
10
3.5 Checking the headlight setting
400726-10
–
Position the vehicle upright on a horizontal surface in front of a light wall and make
a mark at the height of the center of the low beam headlight.
–
Make another mark a distance

under the first mark.
Guideline
Distance 
5 cm (2 in)
–
Position the vehicle vertically a distance

away from the wall.
Guideline
Distance 
5 m (16 ft)
–
The rider now sits down on the motorcycle.
–
Switch on the low beam.
–
Check the headlight setting.
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with driver.
» If the light-dark border does not meet specifications:
–
Adjust the headlight range. ( p. 10)
3.6 Adjusting the headlight range
Preparatory work
–
Check the headlight setting. ( p. 10)
L02459-10
Main work
(EXC
‑
F EU, EXC
‑
F AU, All XCF-W models, All SIX DAYS models)
–
Loosen screw

.
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with driver (instructions on how to apply the mark: Checking the
headlight setting).
Info
A change in weight on the vehicle may require a correction of the head-
light range.
–
Tighten screw  .
M00190-10
(EXC-F US)
–
Loosen screw

.
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the lower mark for a
motorcycle with driver (instructions on how to apply the mark: Checking the
headlight setting).
Info
A change in weight on the vehicle may require a correction of the head-
light range.
–
Tighten screw

.