KTM 2010 990 Super Duke R Скачать руководство пользователя страница 97

Страница: 97 / 198

MAINTENANCE WORK ON FRAME AND ENGINE

B00135-01

–

Push the rear wheel forward as far as possible and take the chain off the rear sprocket.

–

Withdraw the wheel spindle.

–

Pull the rear wheel backward until the brake caliper support hangs free between the
brake disc and the wheel rim.

Warning

Danger of accidents

Reduced braking efficiency caused by damaged brake

discs.

–

Always lay the wheel down in such a way that the brake discs are not dam-
aged.

–

Take the rear wheel carefully out of the swingarm without damaging the rim and/or
brake disc.

Info

Do not operate the foot brake when the rear wheel is removed.

9.37

Installing the rear wheel

Warning

Danger of accidents

Reduced braking efficiency due to oil or grease on the brake discs.

–

Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.

Warning

Danger of accidents

No braking effect when operating the rear brake.

–

After installing the rear wheel, always operate the foot brake until the pressure point is reached.

–

Check the rear hub shock absorbers.

(

p. 97)

Содержание 2010 990 Super Duke R







































































































































































































Результаты поиска

Содержание 2010 990 Super Duke R

Отзывы:

Бренды по названию

Популярные бренды

KTM 2010 990 Super Duke R, Руководство пользователя

Результаты поиска

Содержание 2010 990 Super Duke R

Отзывы:

Бренды по названию

Популярные бренды