KTM 2010 990 Super Duke R Скачать руководство пользователя страница 87

Страница: 87 / 198

MAINTENANCE WORK ON FRAME AND ENGINE

700577-10

–

Move the brake fluid reservoir mounted on the handlebar to a horizontal position.

–

Check the brake fluid level in the brake fluid reservoir



» If the brake fluid is below the

MIN

marking:

–

Add front brake fluid.

(

p. 85)

9.28

Adding front brake fluid

Warning

Danger of accidents

Failure of the brake system.

–

If the brake fluid level falls below the

MIN

mark, this indicates a leakage in the brake system or worn-out brake linings. Check

the brake system and do not continue riding. (Your authorized KTM workshop will be glad to help.)

Warning

Skin irritation

Brake fluid can cause skin irritation on contact.

–

Avoid contact with skin and eyes, and keep out of the reach of children.

–

Wear suitable protective clothing and goggles.

–

If brake fluid gets into your eyes, rinse thoroughly with water and contact a doctor immediately.

Warning

Danger of accidents

Reduced braking effect caused by old brake fluid.

–

Change the brake fluid of the front and rear brakes according to the service schedule. (Your authorized KTM workshop will be
glad to help.)

Содержание 2010 990 Super Duke R







































































































































































































Результаты поиска

Содержание 2010 990 Super Duke R

Отзывы:

Бренды по названию

Популярные бренды

KTM 2010 990 Super Duke R, Руководство пользователя

Результаты поиска

Содержание 2010 990 Super Duke R

Отзывы:

Бренды по названию

Популярные бренды