KTM 2010 990 Super Duke R Скачать руководство пользователя страница 78

Страница: 78 / 198

MAINTENANCE WORK ON FRAME AND ENGINE

9.20

Cleaning the chain

Warning

Danger of accidents

Oil or grease on the tires reduces their grip.

–

Remove oil and grease with a suitable cleaning material.

Warning

Danger of accidents

Reduced braking efficiency due to oil or grease on the brake discs.

–

Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.

Info

The service life of the chain depends largely on its maintenance.

400725-01

–

Clean the chain regularly.

–

Rinse off loose dirt with a soft jet of water.

–

Remove old grease remains with chain cleaner.

Chain cleaner (

p. 188)

–

After drying, apply chain spray.

Chain lube for road use (

p. 188)

Содержание 2010 990 Super Duke R







































































































































































































Результаты поиска

Содержание 2010 990 Super Duke R

Отзывы:

Бренды по названию

Популярные бренды

KTM 2010 990 Super Duke R, Руководство пользователя

Результаты поиска

Содержание 2010 990 Super Duke R

Отзывы:

Бренды по названию

Популярные бренды