background image

ENGLISH

7

Oil tank

The oil tank 

1

is mounted on the right side in front of the fuel tank. Here,

the two-stroke oil for separate lubrication of the engine must be filled in.
The oil level can easily be checked through the transparent material of the
oil tank.

Engine oil:

2-stroke engine oil suitable for a mixing ratio of 1:50

and for separate lubrication

KTM recommends  SHELL ADVANCE Ultra 2

To open it: pull vent hose out of the frame and turn closure cap counter-

clockwise.

To close it: apply closure cap and turn it clockwise. Stick vent hose into

frame and install it without kinks.

Tank volume: 1.3 liters

!

CAUTION

!

– O

NCE THERE IS NO TWO

-

STROKE OIL IN THE OIL TANK

THE ENGINE IS BOUND TO

BREAK DOWN

.

– T

HE VENT HOSE MUST ALWAYS BE INSTALLED WITHOUT KINKS

.

Choke

When tilting the choke lever 

2

upwards, a bore is opened in the carbure-

tor, which enables the engine to take additional fuel.  This creates a rich fuel
air mixture, that is needed for a cold start.
Tilting the choke lever downwards closes the bore again.

Shift lever

The shift lever is mounted on the left side of the engine. The position of the
gears is shown in the illustration. Neutral, or the idle speed, is located bet-
ween first and second gear.

Kickstarter

The kickstarter is mounted on the left side of the engine. Its upper part can
be swivelled.

WARNING

– I

F YOU WANT TO START THE ENGINE

MAKE SURE THAT YOU ALWAYS PUT ON STURDY

MOTORCYCLE BOOTS IN ORDER TO AVOID INJURIES

. Y

OU MIGHT SLIP OFF THE KICK

-

STARTER

OR THE ENGINE MAY KICK BACK AND PROPEL YOUR FOOT UPWARD WITH

GREAT VEHEMENCE

.

– A

LWAYS KICK KICKSTARTER BRISKLY ALL THE WAY WITHOUT OPENING THE THROTTLE

.

K

ICKING THE KICKSTARTER WITH NOT ENOUGH MOMENTUM

AND AN OPENED

THROTTLE GRIP INCREASE THE KICK

-

BACK HAZARD

.

Foot brake pedal

The foot brake pedal is disposed in front of the right foot rest. Its basic posi-
tion can be adjusted to your seat position (see maintenance work).

WARNING

I

F THE RESISTANCE IN THE HAND BRAKE LEVER OR FOOT BRAKE PEDAL FEELS

SPONGY

(

TOO MUCH GIVE

), 

THIS IS AN INDICATION THAT SOMETHING IS WRONG WITH THE

BRAKE SYSTEM

. D

ON

T RIDE YOUR MOTORCYCLE ANYMORE WITHOUT FIRST HAVING THE

BRAKE SYSTEM LOOKED OVER BY A

KTM 

DEALER

.

2

2,3,4,5,6

1

N

1

Содержание 125 EXE 2001





































Отзывы: