6
ENGLISH
- Join plug-in connector for alarm system.
- Position protection cap
(6
.
- Tighten cable tie
.
- Position retaining bracket
with spacer washer
(included).
The cable pull is above the retaining bracket (see arrow).
- Mount screw
(3
, but do not tighten yet.
- Mount supports for passenger seat with screws
(2
and tighten with
15 Nm.
- Tighten screw
(3
.
- Join plug-in connector
(7
for reed switch
(included).
- Glue on reed switch
as shown and, if necessary, and mount and
tighten tapping screws
(included).
- Glue reed switch
onto the passenger seat as shown and, if nec-
essary, mount and tighten tapping screws
(included).
Properly route cables and ensure that the cables cannot be
kinked or pinched!
Final steps
- Install the passenger seat (see the Owner’s Manual).
