5
ENGLISH
Scope of supply
1x retaining bracket, alarm system
1x reed switch with counter piece
2x rubber support
1x rubber support
2x screw M6x25
2x range change metal nut M4
1x spacer washer
1x cable tie
4x tapping screw
Preparatory work
- Take off the passenger seat (see the Owner’s Manual).
Assembly
- Glue rubber supports
and
onto the retaining bracket
(every-
thing included).
- Mount range change metal nuts
(included).
- Position alarm system
(1
(not included).
- Mount and tighten screws
(included).
- Mount cable tie
(included), but do not tighten yet.
- Remove screws
(2
.
- Remove supports for passenger seat.
- Remove screw
(3
.
- Remove retaining bracket
(4
.
NOTE
The retaining bracket is not re
fi
tted.
- Remove dummy plug
(5
from alarm system plug.
Store the dummy plug in a safe place! This is always required
for operation without the alarm system!
