ENGLISH
5
1
2
4
5
3
7
6
4
1
3
1
3
A
1
Preparations
-
Switch off the ignition.
-
Jack up the motorcycle.
-
Remove the seat.
Mounting the UST for riding
-
Connect the diagnosis plug-in cable
(4)
with the motorcycle wiring harness
(7)
and the UST adapter
(1)
.
NOTE:
The plug-in connector
(6)
is used to activate and deactivate the ignition.
Plug-in connector disconnected --> ignition off.
Plug-in connector connected --> ignition on.
-
Pull the protective sleeve
(3)
over the UST adapter
(1)
and under the fixa-
tion rubber element of the battery (Figure
A
).
-
Route the diagnosis plug-in cable.
Route the diagnosis plug-in cable such that it is not damaged when the
seat is mounted.
NOTE:
While data is being recorded during the ride, the plug-in connector
(6)
for
the ignition must be disconnected --> ignition off.
Final steps
-
Mount the seat.
It is recommended that you only use the UST in cooperation with an authorized KTM workshop.
You should be aware that use of the UST enables you to alter the adjustment of your motorcycle in such a way that the motorcycle
may cease to function properly and/or engine damage may occur. Use of the UST requires a special mapping on your motorcycle
that can be obtained from your KTM dealer. When this mapping is transferred to your motorcycle, all warranty claims become null
and void. Because the UST is made up of electronic components, it must be handled with utmost care. Contact with dust, dirt and
water should be avoided.
Scope of delivery:
1x user setting tool (UST) - adapter
(1)
69029096000
1x USB cable
(2)
69029096020
1x UST adapter protective sleeve
(3)
69029096030
1x diagnosis plug-in cable
69029096110
1x diagnosis plug-in cable
(4)
1x cable for external battery connection
(5)
